{"title":"Suspension","description":"","products":[{"product_id":"jku-3-link-front-triangulated-4-link-rear-long-arm-bracket-kit-dxf-files","title":"JKU 3-Link Front \u0026 Triangulated 4-Link Rear Long Arm Bracket Kit – DXF Files","description":"\u003cp\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003eJKU 3-Link Front \/ Triangulated 4-Link Rear Belly Pan \u0026amp; Crossmember Bracket Kit – DXF Files\u003c\/p\u003e\n\u003cp\u003eThis DXF file kit provides the core structural brackets and crossmembers required to convert a 2012–2018 JKU (4-door only) to a 3-link front suspension with a triangulated 4-link rear, while integrating a heavy-duty belly pan \/ skid plate system. All components are plasma-table friendly, flat-cut parts featuring tab-and-slot construction for accurate alignment and straightforward fabrication with no sheet-metal bending required.\u003c\/p\u003e\n\u003cp\u003eDesigned for serious builders performing axle swaps or full suspension redesigns, this kit replaces the factory front crossmember with a bolt-in long-arm bracket crossmember and adds a rear triangulated 4-link crossmember paired with a heavy duty skid plate.\u003c\/p\u003e\n\u003cp\u003eWhat’s Included (DXF Files)\u003cbr\u003eThis is a complete DXF file kit containing all bracketry required for the system below:\u003cbr\u003e🔹 Bolt-in front crossmember assembly (factory replacement)\u003cbr\u003e🔹 Front upper link mount (3-link configuration)\u003cbr\u003e🔹 Rear triangulated 4-link frame-side crossmember\u003cbr\u003e🔹 Pair of rear frame-side upper link mounts\u003cbr\u003e🔹 Belly pan \/ skid plate assembly (cut from 1\/4\" steel)\u003cbr\u003eDocumentation:\u003cbr\u003e🔹 Exploded assembly views illustrating component orientation and fitment\u003cbr\u003e🔹 Basic fabrication and installation guidance to assist with layout and hardware selection\u003c\/p\u003e\n\u003cp\u003eMaterial \u0026amp; Fabrication Design:\u003cbr\u003e🔹 Material requirement: Approximately one full 4' × 8' sheet of 1\/4\" steel\u003cbr\u003e🔹 Entire kit is designed to be cut from 1\/4\" steel, including all brackets and skid plate components\u003cbr\u003e🔹 Fully tab-and-slot construction for precise alignment and strong weld joints\u003cbr\u003e🔹 100% plasma-table friendly — all parts are flat-cut\u003cbr\u003e🔹 No sheet metal bending required anywhere in the kit\u003c\/p\u003e\n\u003cp\u003eDesign \u0026amp; Compatibility:\u003cbr\u003e🔹 Designed specifically for 2012–2018 JKU (4-door only)\u003cbr\u003e🔹 Compatible with 2-5\/8\" wide joints (Johnny Joints, Heim joints, Flex joints, etc.)\u003cbr\u003e🔹 9\/16\" bolt holes throughout (can be drilled or edited to 5\/8\" depending on joint selection)\u003cbr\u003e🔹 Optimized for aftermarket axle swaps and long-arm suspension with coilovers or ORI struts\u003c\/p\u003e\n\u003cp\u003eOptional Configuration:\u003cbr\u003eThe single front upper link mount can be duplicated during cutting to convert the front suspension to a 4-link setup, ideal for full hydraulic steering applications.\u003c\/p\u003e\n\u003cp\u003e⚠️ Important Notes\u003cbr\u003e🔹 This kit includes brackets, crossmembers, and skid plate DXF files only\u003cbr\u003e🔹 Intended for experienced builders and off-road fabrication projects\u003c\/p\u003e\n\u003cp\u003eThese digital DXF files are intended for personal or commercial fabrication use.\u003cbr\u003eFiles may not be shared, resold, or redistributed.\u003cbr\u003eNo physical brackets, skid plates, hardware, or materials are included.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":44405501132879,"sku":"DVX-JK-LINK4-KIT-DXF","price":249.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Capture11_07a33fda-e786-495e-9f90-402af61872d8.png?v=1769472849"},{"product_id":"axle-mount-lower-coil-over-shock-brackets-dxf-files","title":"Axle Mount Lower Coil Over Shock Brackets – DXF Files","description":"\u003cp\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003eAxle Mount Offset Lower Coil Over Shock Brackets – DXF Files\u003c\/p\u003e\n\u003cp\u003eBuilding custom suspension mounts for your off-road project, hot rod, buggy, or axle swap? These DXF files let you precisely CNC cut and fabricate your own lower shock mount brackets.\u003cbr\u003e🔹 Universal Fitment – Perfect for coilovers, traditional shocks, air shocks, and more.\u003cbr\u003e🔹 CNC-Ready – Optimized METRIC and Standard DXF files for plasma, laser, or waterjet cutting from 1\/4\" steel.\u003cbr\u003e🔹 1\/2\" Bolt Hole – Compatible with standard shock mounting hardware, easily drilled larger if required.\u003c\/p\u003e\n\u003cp\u003eThese DXF files are intended for personal or commercial fabrication use. No physical brackets, hardware, or materials included.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":44783220719695,"sku":null,"price":7.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Capture5_0b905dce-eb05-49f0-b2a3-ee382127c05e.png?v=1773519696"},{"product_id":"universal-coil-over-shock-tower-dxf-file-package-8-10-12-14-inch-height-dxf-files","title":"Universal Coil Over Shock Tower DXF File Package 8, 10, 12, 14 Inch Height – DXF Files","description":"\u003cp\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003eUniversal Coilover Shock Towers – DXF Files\u003c\/p\u003e\n\u003cp\u003eFabricate your own heavy-duty coilover shock towers with this DXF file package. Multiple height options are included so you can fine-tune your suspension build to your exact needs.\u003c\/p\u003e\n\u003cp\u003e🔹 CNC-ready DXF files for plasma, laser, or waterjet cutting from 1\/4\" steel\u003cbr\u003e🔹 Includes 8”, 10”, 12”, and 14” tower height options in one package\u003cbr\u003e🔹 Designed for 2.5” coilover shocks, mounts off the side of a straight frame rail\u003cbr\u003e🔹 Adjustable mounting width to fit a variety of shock setups\u003cbr\u003e🔹 Flat-plate design – plasma-friendly with no complex bends. Easily trimmed or ground to match custom frame profiles\u003c\/p\u003e\n\u003cp\u003eThese digital DXF files are for personal or commercial fabrication use. No physical products, hardware, or materials are included with this listing.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":44783343075407,"sku":null,"price":28.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Capture1_299601c0-07c7-4872-b9ba-e9579e1b0328.png?v=1773519922"},{"product_id":"universal-triangulated-4-link-bracket-kit-dxf-files","title":"Universal Triangulated 4 Link Bracket Kit – DXF Files","description":"\u003cp\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003eUniversal Triangulated 4-Link Suspension Kit – DXF Files\u003c\/p\u003e\n\u003cp\u003eDesigning a custom suspension system for your off-road rig, buggy, or project vehicle? This complete DXF file package provides all the bracket files needed to fabricate a strong triangulated 4-link setup—perfect for axle swaps or upgrading from your existing suspension system.\u003c\/p\u003e\n\u003cp\u003e🔹 CNC-ready DXF files optimized for plasma, laser, or waterjet cutting from 1\/4\" steel\u003cbr\u003e🔹 Includes:\u003cbr\u003e • Dual frame-side upper and lower link mounts\u003cbr\u003e • Upper axle-side link mounts\u003cbr\u003e • Lower axle-side link mounts \u003cbr\u003e🔹 Compatible with common 2.625” wide joints (Johnny Joints, Heim Joints, Flex Joints, etc.)\u003cbr\u003e🔹 9\/16” bolt holes – easily drilled larger if needed. Lower axle side brackets designed for 3.5 inch axle tube (can be modified)\u003cbr\u003e🔹 Plasma-friendly tab-and-slot design for simple cutting, fitment, and welding—no bending required\u003c\/p\u003e\n\u003cp\u003eThese digital DXF files are intended for personal or commercial fabrication use. No physical brackets, hardware, or materials are included with this listing.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":44784246030415,"sku":"UNI-4LNK-KIT","price":42.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Capture18_cf2b9945-ac26-49bd-8ab7-905c009a9239.png?v=1773523109"},{"product_id":"jk-3-link-front-triangulated-4-link-rear-long-arm-bracket-kit-dxf-files","title":"JK 3-Link Front \u0026 Triangulated 4-Link Rear Long Arm Bracket Kit – DXF Files","description":"\u003cp\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003eJK (2 DOOR) 3-Link Front \/ Triangulated 4-Link Rear Belly Pan \u0026amp; Crossmember Bracket Kit – DXF Files\u003c\/p\u003e\n\u003cp\u003eThis DXF file kit provides the core structural brackets and crossmembers required to convert a 2012–2018 JK (2-door only) to a 3-link front suspension with a triangulated 4-link rear, while integrating a heavy-duty belly pan \/ skid plate system. All components are plasma-table friendly, flat-cut parts featuring tab-and-slot construction for accurate alignment and straightforward fabrication with no sheet-metal bending required.\u003c\/p\u003e\n\u003cp\u003eDesigned for serious builders performing axle swaps or full suspension redesigns, this kit replaces the factory front crossmember with a bolt-in long-arm bracket crossmember and adds a rear triangulated 4-link crossmember paired with a heavy duty skid plate.\u003c\/p\u003e\n\u003cp\u003eWhat’s Included (DXF Files)\u003cbr\u003eThis is a complete DXF file kit containing all bracketry required for the system below:\u003cbr\u003e🔹 Bolt-in front crossmember assembly (factory replacement)\u003cbr\u003e🔹 Front upper link mount (3-link configuration)\u003cbr\u003e🔹 Rear triangulated 4-link frame-side crossmember\u003cbr\u003e🔹 Pair of rear frame-side upper link mounts\u003cbr\u003e🔹 Belly pan \/ skid plate assembly (cut from 1\/4\" steel)\u003cbr\u003eDocumentation:\u003cbr\u003e🔹 Exploded assembly views illustrating component orientation and fitment\u003cbr\u003e🔹 Basic fabrication and installation guidance to assist with layout and hardware selection\u003c\/p\u003e\n\u003cp\u003eMaterial \u0026amp; Fabrication Design:\u003cbr\u003e🔹 Material requirement: Approximately 3\/4 of a 4' × 8' sheet of 1\/4\" steel\u003cbr\u003e🔹 Entire kit is designed to be cut from 1\/4\" steel, including all brackets and skid plate components\u003cbr\u003e🔹 Fully tab-and-slot construction for precise alignment and strong weld joints\u003cbr\u003e🔹 100% plasma-table friendly — all parts are flat-cut\u003cbr\u003e🔹 No sheet metal bending required anywhere in the kit\u003c\/p\u003e\n\u003cp\u003eDesign \u0026amp; Compatibility:\u003cbr\u003e🔹 Designed specifically for 2012–2018 Jeep Wrangler JKU (4-door only)\u003cbr\u003e🔹 Compatible with 2-5\/8\" wide joints (Johnny Joints, Heim joints, Flex joints, etc.)\u003cbr\u003e🔹 9\/16\" bolt holes throughout (can be drilled or edited to 5\/8\" depending on joint selection)\u003cbr\u003e🔹 Optimized for aftermarket axle swaps and long-arm suspension with coilovers or ORI struts\u003c\/p\u003e\n\u003cp\u003eOptional Configuration:\u003cbr\u003eThe single front upper link mount can be duplicated during cutting to convert the front suspension to a 4-link setup, ideal for full hydraulic steering applications.\u003c\/p\u003e\n\u003cp\u003e⚠️ Important Notes\u003cbr\u003e🔹 This kit includes brackets, crossmembers, and skid plate DXF files only\u003cbr\u003e🔹 Intended for experienced builders and off-road fabrication projects\u003c\/p\u003e\n\u003cp\u003eThese digital DXF files are intended for personal or commercial fabrication use.\u003cbr\u003eFiles may not be shared, resold, or redistributed.\u003cbr\u003eNo physical brackets, skid plates, hardware, or materials are included.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":45293828145231,"sku":null,"price":239.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Capture9_c3affe99-9d0e-44f3-9ca1-021b8c472b6b.png?v=1779572882"},{"product_id":"universal-3-or-4-link-lower-axle-side-bracket-10-deg-dxf-files","title":"Universal 3 or 4 Link Lower Axle Side Bracket (10 deg) – DXF Files","description":"\u003cp\u003eUniversal 3 or 4 Link Lower Axle Side Bracket (10°) – DXF Files\u003c\/p\u003e\n\u003cp\u003eBuilding your custom suspension setup? These DXF files allow you to cut and fabricate your own universal lower axle-side link brackets, designed for triangulated 3-link and 4-link suspension configurations.\u003c\/p\u003e\n\u003cp\u003e🔹 CNC-ready DXF files optimized for plasma, laser, or waterjet cutting from 1\/4\" steel\u003cbr\u003e🔹 Designed for 3.5\" axle tube \u003cbr\u003e🔹 10° angled bracket design for improved joint alignment in triangulated setups\u003cbr\u003e🔹 Flat-cut tab and slot design — no bending required\u003cbr\u003e🔹 Designed to fit 2.625\" (2 5\/8\") wide suspension joints (Johnny Joints, flex joints, or rod ends with high-misalignment spacers)\u003cbr\u003e🔹 Includes 9\/16\" mounting holes, can be edited or drilled to 5\/8\" or larger as needed\u003c\/p\u003e\n\u003cp\u003eThese digital DXF files are in standard inch, and intended for personal or commercial fabrication use. No physical brackets, hardware, or materials are included.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":45368209801295,"sku":null,"price":7.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Screenshot2026-04-21132743.png?v=1780106376"},{"product_id":"universal-4-link-upper-control-arm-frame-side-mount-22-5-deg-dxf-files","title":"Universal 4-Link Upper Control Arm Frame-Side Mount (22.5 deg)– DXF Files","description":"\u003cp\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003eUniversal 4-Link Upper Control Arm Frame-Side Mount 22.5 deg– DXF Files\u003c\/p\u003e\n\u003cp\u003eBuilding your custom suspension setup? These DXF files allow you to cut and fabricate a universal frame-side upper control arm mount designed for 4-link suspension systems, with built-in adjustability for dialing in anti-squat geometry.\u003c\/p\u003e\n\u003cp\u003e🔹 CNC-ready DXF files optimized for plasma, laser, or waterjet cutting from 1\/4\" steel\u003cbr\u003e🔹 Full tab-and-slot assembly — no bending required\u003cbr\u003e🔹 Designed to fit 2.625\" wide suspension joints (Johnny Joints, flex joints, or rod ends with high-misalignment spacers)\u003cbr\u003e🔹 6.5\" long back plate to weld to inner side of frame with integrated 22.5° mounting angle\u003cbr\u003e🔹 Dual 9\/16\" mounting holes spaced 1\" apart for upper link geometry adjustment (anti-squat tuning)\u003cbr\u003e🔹 Suitable for custom 4-link suspension builds and chassis fabrication\u003c\/p\u003e\n\u003cp\u003eThese digital DXF files are in standard inch and intended for personal or commercial fabrication use. No physical brackets, hardware, or materials are included.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":45368263966799,"sku":null,"price":15.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Screenshot2026-04-21153732.png?v=1780106706"},{"product_id":"track-bar-bracket-upper-and-lower-kit-frame-side-and-axle-side-dxf-files","title":"Track Bar Bracket Upper and lower kit - Frame Side and axle side - DXF Files","description":"\u003cp\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003eAdjustable Upper \u0026amp; Lower Axle Track Bar Bracket Kit – DXF Files\u003c\/p\u003e\n\u003cp\u003eThis DXF file package includes cut-ready files for CNC plasma, laser, or waterjet cutting adjustable upper and lower track bar brackets.\u003c\/p\u003e\n\u003cp\u003e🔹 Upper \u0026amp; lower bracket kit for complete track bar height adjustment.\u003cbr\u003e🔹 3 mounting positions to fine-tune suspension geometry and eliminate bump steer.\u003cbr\u003e🔹 Designed for 3.5” axle tubes but can be modified for other sizes.\u003cbr\u003e🔹 9\/16” mounting holes, easily drilled larger if needed.\u003cbr\u003e🔹 1.6” mounting width for lower axle side bracket\u003cbr\u003e🔹 2\" Mounting width for upper frame side bracket\u003cbr\u003e🔹 Keyed design for easy fitment and welding—no complex bending required.\u003cbr\u003eIncludes Standard and METRIC DXF Files\u003c\/p\u003e\n\u003cp\u003eThese are digital files only—no physical parts or hardware are included.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":45368319377487,"sku":null,"price":18.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Capture.jpg?v=1780107045"},{"product_id":"universal-coil-over-rear-shock-tower-dxf-files","title":"Universal Coil Over Rear Shock Tower  – DXF Files","description":"\u003cp\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003eCoilover Shock Towers Rear – DXF Files\u003c\/p\u003e\n\u003cp\u003eThese DXF files let you fabricate heavy-duty rear coilover shock towers with two design options to suit your build. \u003c\/p\u003e\n\u003cp\u003e🔹 CNC-ready DXF files designed for plasma, laser, or waterjet cutting from 1\/4\" steel\u003cbr\u003e🔹 Includes both 11” height with frame notch and 14” height without frame notch\u003cbr\u003e🔹 Designed for 2.5” coilover shocks and rear frame mounting applications\u003cbr\u003e🔹 Adjustable mounting width to fit different shock hardware setups\u003cbr\u003e🔹 Flat-plate, plasma-friendly design – no complex bends required. Easily trimmed or ground to match custom frame profiles\u003c\/p\u003e\n\u003cp\u003eThese digital DXF files are intended for personal or commercial fabrication use. No physical towers, hardware, or materials are included with this listing.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":45368986173519,"sku":null,"price":14.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Capture7_d06c6a08-1d03-4b85-9304-8bd1860c9778.png?v=1780108626"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/collections\/Capture18_cf2b9945-ac26-49bd-8ab7-905c009a9239.png?v=1775759576","url":"https:\/\/dvxdesigns.com\/collections\/suspension.oembed","provider":"DVX DESIGNS","version":"1.0","type":"link"}