{"title":"Home page","description":null,"products":[{"product_id":"2005-ford-super-duty-dana-60-low-profile-axle-truss-dxf-files","title":"2005+ Ford Super Duty Dana 60 Low Profile Axle Truss – DXF Files","description":"\u003cp\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003e2005+ Ford Super Duty Dana 60 Low Profile Axle Truss – DXF Files\u003c\/p\u003e\n\u003cp\u003eThis low-profile axle truss is designed for maximum clearance and strength - perfect for coilovers, ORI struts, air shocks, and high-articulation off-road suspension setups.\u003c\/p\u003e\n\u003cp\u003e🔹 CNC-ready DXF file designed for plasma, laser, or waterjet cutting\u003cbr\u003e🔹 Cut from 1\/4\" steel (top plates may be cut in 3\/8\" with minor trimming)\u003cbr\u003e🔹 All tab-and-slot construction — zero bending required\u003cbr\u003e🔹 Low-profile design offers excellent clearance for shocks, springs, and suspension hardware\u003cbr\u003e🔹 Designed to fit tight around the center casting and can be welded to it (minor trimming may be required due to casting variations)\u003cbr\u003e🔹 Includes one DXF file containing the full truss assembly with gussets and interlocking plates\u003c\/p\u003e\n\u003cp\u003e⚠️ Installation Note\u003cbr\u003eTo properly fit this truss, you will be required to remove 2\" from the driver-side casting, including both the upper and lower factory radius arm mounts. Test-fit all components before final welding.\u003c\/p\u003e\n\u003cp\u003eThese digital DXF files are intended for personal or commercial fabrication use. No physical truss, hardware, or materials are included with this listing.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":44404919894095,"sku":"DVX-FSD-TRUSS-LP-DXF","price":39.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Capture1.png?v=1769453964"},{"product_id":"jku-3-link-front-triangulated-4-link-rear-long-arm-bracket-kit-dxf-files","title":"JKU 3-Link Front \u0026 Triangulated 4-Link Rear Long Arm Bracket Kit – DXF Files","description":"\u003cp\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003eJKU 3-Link Front \/ Triangulated 4-Link Rear Belly Pan \u0026amp; Crossmember Bracket Kit – DXF Files\u003c\/p\u003e\n\u003cp\u003eThis DXF file kit provides the core structural brackets and crossmembers required to convert a 2012–2018 JKU (4-door only) to a 3-link front suspension with a triangulated 4-link rear, while integrating a heavy-duty belly pan \/ skid plate system. All components are plasma-table friendly, flat-cut parts featuring tab-and-slot construction for accurate alignment and straightforward fabrication with no sheet-metal bending required.\u003c\/p\u003e\n\u003cp\u003eDesigned for serious builders performing axle swaps or full suspension redesigns, this kit replaces the factory front crossmember with a bolt-in long-arm bracket crossmember and adds a rear triangulated 4-link crossmember paired with a heavy duty skid plate.\u003c\/p\u003e\n\u003cp\u003eWhat’s Included (DXF Files)\u003cbr\u003eThis is a complete DXF file kit containing all bracketry required for the system below:\u003cbr\u003e🔹 Bolt-in front crossmember assembly (factory replacement)\u003cbr\u003e🔹 Front upper link mount (3-link configuration)\u003cbr\u003e🔹 Rear triangulated 4-link frame-side crossmember\u003cbr\u003e🔹 Pair of rear frame-side upper link mounts\u003cbr\u003e🔹 Belly pan \/ skid plate assembly (cut from 1\/4\" steel)\u003cbr\u003eDocumentation:\u003cbr\u003e🔹 Exploded assembly views illustrating component orientation and fitment\u003cbr\u003e🔹 Basic fabrication and installation guidance to assist with layout and hardware selection\u003c\/p\u003e\n\u003cp\u003eMaterial \u0026amp; Fabrication Design:\u003cbr\u003e🔹 Material requirement: Approximately one full 4' × 8' sheet of 1\/4\" steel\u003cbr\u003e🔹 Entire kit is designed to be cut from 1\/4\" steel, including all brackets and skid plate components\u003cbr\u003e🔹 Fully tab-and-slot construction for precise alignment and strong weld joints\u003cbr\u003e🔹 100% plasma-table friendly — all parts are flat-cut\u003cbr\u003e🔹 No sheet metal bending required anywhere in the kit\u003c\/p\u003e\n\u003cp\u003eDesign \u0026amp; Compatibility:\u003cbr\u003e🔹 Designed specifically for 2012–2018 JKU (4-door only)\u003cbr\u003e🔹 Compatible with 2-5\/8\" wide joints (Johnny Joints, Heim joints, Flex joints, etc.)\u003cbr\u003e🔹 9\/16\" bolt holes throughout (can be drilled or edited to 5\/8\" depending on joint selection)\u003cbr\u003e🔹 Optimized for aftermarket axle swaps and long-arm suspension with coilovers or ORI struts\u003c\/p\u003e\n\u003cp\u003eOptional Configuration:\u003cbr\u003eThe single front upper link mount can be duplicated during cutting to convert the front suspension to a 4-link setup, ideal for full hydraulic steering applications.\u003c\/p\u003e\n\u003cp\u003e⚠️ Important Notes\u003cbr\u003e🔹 This kit includes brackets, crossmembers, and skid plate DXF files only\u003cbr\u003e🔹 Intended for experienced builders and off-road fabrication projects\u003c\/p\u003e\n\u003cp\u003eThese digital DXF files are intended for personal or commercial fabrication use.\u003cbr\u003eFiles may not be shared, resold, or redistributed.\u003cbr\u003eNo physical brackets, skid plates, hardware, or materials are included.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":44405501132879,"sku":"DVX-JK-LINK4-KIT-DXF","price":249.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Capture11_07a33fda-e786-495e-9f90-402af61872d8.png?v=1769472849"},{"product_id":"jk-low-profile-frame-chop-rear-bumper-dxf-files","title":"JK Low Profile Frame Chop Rear Bumper – DXF Files","description":"\u003cp\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003eThis rear bumper is designed for a clean, high-clearance frame chop setup on 2007–2018 JK and JKU models. The design fully removes the factory rear crossmember and shortens the frame 3.95\" (100mm) to achieve a tight, tucked appearance while maintaining structural strength.\u003c\/p\u003e\n\u003cp\u003eThis is a fabrication kit plans are intended for builders comfortable with welding, grinding, and frame modification.\u003c\/p\u003e\n\u003cp\u003e🔹 CNC-ready DXF files for plasma, laser, or waterjet cutting\u003cbr\u003e🔹 Designed for 3\/16\" steel plate (standard files included)\u003cbr\u003e🔹 Metric 6mm plate DXF files also included\u003cbr\u003e🔹 Includes separate DXF files for tow shackle mounts\u003cbr\u003e🔹 Tab-and-slot construction for straightforward alignment\u003cbr\u003e🔹 Low-profile, high-clearance design superior departure angle\u003cbr\u003e🔹 Compatible with JK \u0026amp; JKU (2007–2018)\u003c\/p\u003e\n\u003cp\u003eThis DXF package includes flat-cut fabrication files and instructions only. Welding, finishing, and coating are the responsibility of the builder.\u003c\/p\u003e\n\u003cp\u003eThese digital files are intended for personal or commercial fabrication use to produce physical bumpers. Files may not be shared, resold, or redistributed. No physical bumper, hardware, or materials are included with this listing.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":44531882459215,"sku":"DVX-JK-BODY-BMPR-DXF","price":89.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Screenshot_2026-03-02_000556.png?v=1772432212"},{"product_id":"jeep-wrangler-jk-low-profile-frame-chop-front-bumper-dxf-files-874567","title":"JK Ultra Low Profile Front Winch Bumper – Private Listing - DXF Files","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cdiv id=\":11o\" class=\"ii gt adO\"\u003e\n\u003cdiv id=\":11n\" class=\"a3s aiL\"\u003e\n\u003cdiv id=\"avWBGd-738\"\u003e\n\u003cdiv dir=\"ltr\"\u003eAll of the plates as separate DXF files. \n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eEvery file that has \"2X\" or 4X at the start of the name - it requires 2 or 4 of that same part.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe Part \" 2X Offset Shackle mount METRIC\" should be cut out of thicker material I would do 12 to 16mm and you need 2 of them.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe rest of the parts including PSC cooler brackets are to be cut in 6mm.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\":121\" class=\"hq gt\"\u003e\u003c\/div\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":44757033222223,"sku":null,"price":325.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Screenshot2026-03-13005116.png?v=1773435160"},{"product_id":"axle-mount-lower-coil-over-shock-brackets-dxf-files","title":"Axle Mount Lower Coil Over Shock Brackets – DXF Files","description":"\u003cp\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003eAxle Mount Offset Lower Coil Over Shock Brackets – DXF Files\u003c\/p\u003e\n\u003cp\u003eBuilding custom suspension mounts for your off-road project, hot rod, buggy, or axle swap? These DXF files let you precisely CNC cut and fabricate your own lower shock mount brackets.\u003cbr\u003e🔹 Universal Fitment – Perfect for coilovers, traditional shocks, air shocks, and more.\u003cbr\u003e🔹 CNC-Ready – Optimized METRIC and Standard DXF files for plasma, laser, or waterjet cutting from 1\/4\" steel.\u003cbr\u003e🔹 1\/2\" Bolt Hole – Compatible with standard shock mounting hardware, easily drilled larger if required.\u003c\/p\u003e\n\u003cp\u003eThese DXF files are intended for personal or commercial fabrication use. No physical brackets, hardware, or materials included.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":44783220719695,"sku":null,"price":7.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Capture5_0b905dce-eb05-49f0-b2a3-ee382127c05e.png?v=1773519696"},{"product_id":"universal-coil-over-shock-tower-dxf-file-package-8-10-12-14-inch-height-dxf-files","title":"Universal Coil Over Shock Tower DXF File Package 8, 10, 12, 14 Inch Height – DXF Files","description":"\u003cp\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003eUniversal Coilover Shock Towers – DXF Files\u003c\/p\u003e\n\u003cp\u003eFabricate your own heavy-duty coilover shock towers with this DXF file package. Multiple height options are included so you can fine-tune your suspension build to your exact needs.\u003c\/p\u003e\n\u003cp\u003e🔹 CNC-ready DXF files for plasma, laser, or waterjet cutting from 1\/4\" steel\u003cbr\u003e🔹 Includes 8”, 10”, 12”, and 14” tower height options in one package\u003cbr\u003e🔹 Designed for 2.5” coilover shocks, mounts off the side of a straight frame rail\u003cbr\u003e🔹 Adjustable mounting width to fit a variety of shock setups\u003cbr\u003e🔹 Flat-plate design – plasma-friendly with no complex bends. Easily trimmed or ground to match custom frame profiles\u003c\/p\u003e\n\u003cp\u003eThese digital DXF files are for personal or commercial fabrication use. No physical products, hardware, or materials are included with this listing.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":44783343075407,"sku":null,"price":28.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Capture1_299601c0-07c7-4872-b9ba-e9579e1b0328.png?v=1773519922"},{"product_id":"universal-toe-alignment-tool-dxf-files","title":"Universal Toe Alignment Tool – DXF Files","description":"\u003cp\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003eUniversal Toe Alignment Tool – DXF Files\u003c\/p\u003e\n\u003cp\u003eQuickly and accurately set your toe angle at home—no alignment shop visit required. This universal tool is perfect for off-road rigs or daily drivers.\u003c\/p\u003e\n\u003cp\u003e🔹 CNC-ready DXF files for plasma, laser, or waterjet cutting\u003cbr\u003e🔹 Use flat as cut or bend along the marked line for added rigidity\u003cbr\u003e • Flat version recommended in 1\/8”+ steel\u003cbr\u003e • Bent version works in 16 gauge+\u003cbr\u003e🔹 Works with most off-road and light-truck tie-rod setups\u003cbr\u003e🔹 Simple, accurate way to measure and adjust toe after suspension or steering work\u003cbr\u003e🔹 Great for post-trail checks, race prep, or fresh installs\u003cbr\u003e🔹 Includes one pair in a single DXF file - Metric and Standard Files Included\u003c\/p\u003e\n\u003cp\u003eThis tool fits 5x5, 8x170, and many other common bolt patterns, but fitment cannot be guaranteed on all patterns or vehicle setups. Some trimming or modification may be required depending on brake calipers, hub size, or bolt pattern.\u003c\/p\u003e\n\u003cp\u003eThese digital DXF files are for personal or commercial fabrication use. No physical tool, hardware, or materials are included.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":44783457009743,"sku":null,"price":8.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Capture8_2c7c9a7d-3409-49e6-945e-c9266ae83fa4.png?v=1773521307"},{"product_id":"universal-triangulated-4-link-bracket-kit-dxf-files","title":"Universal Triangulated 4 Link Bracket Kit – DXF Files","description":"\u003cp\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003eUniversal Triangulated 4-Link Suspension Kit – DXF Files\u003c\/p\u003e\n\u003cp\u003eDesigning a custom suspension system for your off-road rig, buggy, or project vehicle? This complete DXF file package provides all the bracket files needed to fabricate a strong triangulated 4-link setup—perfect for axle swaps or upgrading from your existing suspension system.\u003c\/p\u003e\n\u003cp\u003e🔹 CNC-ready DXF files optimized for plasma, laser, or waterjet cutting from 1\/4\" steel\u003cbr\u003e🔹 Includes:\u003cbr\u003e • Dual frame-side upper and lower link mounts\u003cbr\u003e • Upper axle-side link mounts\u003cbr\u003e • Lower axle-side link mounts \u003cbr\u003e🔹 Compatible with common 2.625” wide joints (Johnny Joints, Heim Joints, Flex Joints, etc.)\u003cbr\u003e🔹 9\/16” bolt holes – easily drilled larger if needed. Lower axle side brackets designed for 3.5 inch axle tube (can be modified)\u003cbr\u003e🔹 Plasma-friendly tab-and-slot design for simple cutting, fitment, and welding—no bending required\u003c\/p\u003e\n\u003cp\u003eThese digital DXF files are intended for personal or commercial fabrication use. No physical brackets, hardware, or materials are included with this listing.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":44784246030415,"sku":"UNI-4LNK-KIT","price":42.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Capture18_cf2b9945-ac26-49bd-8ab7-905c009a9239.png?v=1773523109"},{"product_id":"jk-jku-orbital-valve-mount-dxf-files","title":"JK\/JKU Orbital Valve Mount – DXF Files","description":"\u003cp\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003eJK\/JKU PSC Orbital Valve Mount – DXF Files\u003c\/p\u003e\n\u003cp\u003eUpgrading to full hydraulic steering on your JK \/ JKU? These DXF files allow you to cut and fabricate a clean, secure frame-side mount for a PSC-style orbital valve.\u003c\/p\u003e\n\u003cp\u003e🔹 CNC-ready DXF files optimized for plasma, laser, or waterjet cutting from 1\/4\" steel\u003cbr\u003e🔹 Full tab-and-slot construction for accurate alignment and easy assembly\u003cbr\u003e🔹 Designed to mount PSC-style orbital valves in Jeep JK \/ JKU engine bays\u003cbr\u003e🔹 Slotted mounting holes allow for rotational adjustment of the orbital valve for optimal hose routing and clearance\u003cbr\u003e🔹 Compact, rigid design suited for full hydraulic steering conversions\u003cbr\u003e🔹 Flat-cut design — no bending required\u003c\/p\u003e\n\u003cp\u003eThese digital DXF files include metric and standard files, and are intended for personal or commercial fabrication use. No physical mount, hardware, or materials are included with this listing.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":45138531352655,"sku":null,"price":24.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Screenshot24112916.png?v=1777048127"},{"product_id":"jk-jku-ultra-low-profile-winch-bumper-dxf-files","title":"JK\/JKU Ultra Low Profile Winch Bumper - DXF files","description":"\u003cp\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003eJK\/JKU Ultra Low Profile Front Winch Bumper – DXF Files\u003c\/p\u003e\n\u003cp\u003eThese DXF files allow you to fabricate a high-clearance, low-profile front winch bumper for the JK. Designed for maximum approach angle and the smallest possible packaging without requiring a frame chop.\u003c\/p\u003e\n\u003cp\u003e🔹 CNC-ready DXF files for plasma, laser, or waterjet cutting\u003cbr\u003e🔹 High-clearance, low-profile design for 2007–2018 JK\u003cbr\u003e🔹 All components are flat-cut parts — no sheet metal bending required\u003cbr\u003e🔹 Designed to be cut from 3\/16\" or 1\/4\" steel plate\u003cbr\u003e🔹 Tow shackle mount files included (can be cut from thicker material if desired)\u003cbr\u003e🔹 Winch-compatible — fits most common winches, including Warn Zeon\u003cbr\u003e🔹 Easy, bolt-on installation — mounts to the factory frame with no modifications\u003cbr\u003e🔹 2012–2018 models: no vacuum pump relocation required for most winch configurations\u003c\/p\u003e\n\u003cp\u003eThese DXF files are intended for personal or commercial fabrication use to produce physical bumpers. Files may not be shared, resold, or redistributed. No physical bumper, hardware, or materials are included with this listing.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":45293785907279,"sku":null,"price":49.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Capture8_8dd4aba4-7824-43d7-8ae9-ca11727d9306.png?v=1779572039"},{"product_id":"jk-jku-rear-bumper-dxf-files","title":"JK\/JKU Rear Bumper - DXF Files","description":"\u003cp\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003eJK Low Profile Rear Bumper – DXF Files\u003c\/p\u003e\n\u003cp\u003eThese DXF files allow you to fabricate a high-clearance, low-profile rear bumper for the JK\/JKU. Designed for strength, simplicity, and clean fitment.\u003c\/p\u003e\n\u003cp\u003e🔹 CNC-ready DXF files for plasma, laser, or waterjet cutting\u003cbr\u003e🔹 High-clearance, low-profile design with cutout for spare tire clearance\u003cbr\u003e🔹 All components are flat-cut parts — no complex bending required\u003cbr\u003e🔹 Includes two cutting layouts:\u003cbr\u003e • Full-width layout for large-format tables\u003cbr\u003e • Shortened 4×4 layout with segmented long pieces so the entire bumper can be cut on a 4×4 plasma table using 3\/16\" steel\u003cbr\u003e🔹 Clears a 35\" spare tire on the factory tire carrier; 37\" tire possible with an adjustable tire rack (37\" shown in renderings)\u003cbr\u003e🔹 Bolts directly onto 2007–2018 Jeep Wrangler JK\u003cbr\u003e🔹 Designed to clear the factory JK trailer hitch\u003cbr\u003e🔹 Designed to be cut from 3\/16\" steel\u003cbr\u003e • Frame-side mounting plates may optionally be separated and cut from 1\/4\" steel\u003cbr\u003e • Tow shackle mounts may be cut from 1\/2\"–1\" steel, or doubled 3\/8\" plate, depending on builder preference\u003c\/p\u003e\n\u003cp\u003eThese DXF files are intended for personal or commercial fabrication use to produce physical bumpers. Files may not be shared, resold, or redistributed. No physical bumper, hardware, or materials are included with this listing.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":45293811073103,"sku":null,"price":79.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Capture11_cbfe921f-cebb-42b9-b0ca-1bd1747afc5a.png?v=1779572558"},{"product_id":"jk-3-link-front-triangulated-4-link-rear-long-arm-bracket-kit-dxf-files","title":"JK 3-Link Front \u0026 Triangulated 4-Link Rear Long Arm Bracket Kit – DXF Files","description":"\u003cp\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003eJK (2 DOOR) 3-Link Front \/ Triangulated 4-Link Rear Belly Pan \u0026amp; Crossmember Bracket Kit – DXF Files\u003c\/p\u003e\n\u003cp\u003eThis DXF file kit provides the core structural brackets and crossmembers required to convert a 2012–2018 JK (2-door only) to a 3-link front suspension with a triangulated 4-link rear, while integrating a heavy-duty belly pan \/ skid plate system. All components are plasma-table friendly, flat-cut parts featuring tab-and-slot construction for accurate alignment and straightforward fabrication with no sheet-metal bending required.\u003c\/p\u003e\n\u003cp\u003eDesigned for serious builders performing axle swaps or full suspension redesigns, this kit replaces the factory front crossmember with a bolt-in long-arm bracket crossmember and adds a rear triangulated 4-link crossmember paired with a heavy duty skid plate.\u003c\/p\u003e\n\u003cp\u003eWhat’s Included (DXF Files)\u003cbr\u003eThis is a complete DXF file kit containing all bracketry required for the system below:\u003cbr\u003e🔹 Bolt-in front crossmember assembly (factory replacement)\u003cbr\u003e🔹 Front upper link mount (3-link configuration)\u003cbr\u003e🔹 Rear triangulated 4-link frame-side crossmember\u003cbr\u003e🔹 Pair of rear frame-side upper link mounts\u003cbr\u003e🔹 Belly pan \/ skid plate assembly (cut from 1\/4\" steel)\u003cbr\u003eDocumentation:\u003cbr\u003e🔹 Exploded assembly views illustrating component orientation and fitment\u003cbr\u003e🔹 Basic fabrication and installation guidance to assist with layout and hardware selection\u003c\/p\u003e\n\u003cp\u003eMaterial \u0026amp; Fabrication Design:\u003cbr\u003e🔹 Material requirement: Approximately 3\/4 of a 4' × 8' sheet of 1\/4\" steel\u003cbr\u003e🔹 Entire kit is designed to be cut from 1\/4\" steel, including all brackets and skid plate components\u003cbr\u003e🔹 Fully tab-and-slot construction for precise alignment and strong weld joints\u003cbr\u003e🔹 100% plasma-table friendly — all parts are flat-cut\u003cbr\u003e🔹 No sheet metal bending required anywhere in the kit\u003c\/p\u003e\n\u003cp\u003eDesign \u0026amp; Compatibility:\u003cbr\u003e🔹 Designed specifically for 2012–2018 Jeep Wrangler JKU (4-door only)\u003cbr\u003e🔹 Compatible with 2-5\/8\" wide joints (Johnny Joints, Heim joints, Flex joints, etc.)\u003cbr\u003e🔹 9\/16\" bolt holes throughout (can be drilled or edited to 5\/8\" depending on joint selection)\u003cbr\u003e🔹 Optimized for aftermarket axle swaps and long-arm suspension with coilovers or ORI struts\u003c\/p\u003e\n\u003cp\u003eOptional Configuration:\u003cbr\u003eThe single front upper link mount can be duplicated during cutting to convert the front suspension to a 4-link setup, ideal for full hydraulic steering applications.\u003c\/p\u003e\n\u003cp\u003e⚠️ Important Notes\u003cbr\u003e🔹 This kit includes brackets, crossmembers, and skid plate DXF files only\u003cbr\u003e🔹 Intended for experienced builders and off-road fabrication projects\u003c\/p\u003e\n\u003cp\u003eThese digital DXF files are intended for personal or commercial fabrication use.\u003cbr\u003eFiles may not be shared, resold, or redistributed.\u003cbr\u003eNo physical brackets, skid plates, hardware, or materials are included.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":45293828145231,"sku":null,"price":239.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Capture9_c3affe99-9d0e-44f3-9ca1-021b8c472b6b.png?v=1779572882"},{"product_id":"2005-ford-super-duty-dana-60-full-height-axle-truss-dxf-files","title":"2005+ Ford Super Duty Dana 60 Full-Height Axle Truss – DXF Files","description":"\u003cp\u003e2005+ Ford Super Duty Dana 60 Full-Height Axle Truss – DXF Files\u003cbr\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003eThis heavy-duty full-height axle truss is designed to maximize strength and rigidity for high-load off-road applications. Built for Buggy builds, large tires, and hard use, this design prioritizes structural reinforcement of the axle tubes and center section.\u003c\/p\u003e\n\u003cp\u003e🔹 CNC-ready DXF files designed for plasma, laser, or waterjet cutting\u003cbr\u003e🔹 Top plates designed for 3\/8\" steel for maximum strength\u003cbr\u003e🔹 Front and rear plates designed for 1\/4\" steel\u003cbr\u003e🔹 Separate DXF files provided for each material thickness\u003cbr\u003e🔹 Full tab-and-slot construction — no bending required\u003cbr\u003e🔹 Full-height design provides increased axle tube and center section reinforcement\u003cbr\u003e🔹 Designed to fit tight around the Dana 60 center casting and weld directly to it\u003cbr\u003e🔹 Minor trimming may be required due to casting variations\u003cbr\u003e🔹 Suitable for coilovers, ORI struts, air shocks, and custom off-road suspension systems\u003cbr\u003e🔹 Includes DXF files for the complete truss assembly with interlocking plates and gussets\u003c\/p\u003e\n\u003cp\u003e⚠️ Installation Note\u003cbr\u003eTo properly fit this truss, modification of the factory axle housing is required. Approximately 2\" of the driver-side casting must be removed, including the factory upper and lower radius arm mounts. All components should be test-fit prior to final welding to account for axle casting variations.\u003c\/p\u003e\n\u003cp\u003eThese digital DXF files are intended for personal or commercial fabrication use. No physical truss, hardware, or materials are included with this listing.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":45293856391247,"sku":null,"price":39.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Screenshot2026-02-07235503.png?v=1779574942"},{"product_id":"gm-14-bolt-low-profile-rear-axle-truss-dxf-files","title":"GM 14-Bolt Low Profile Rear Axle Truss – DXF Files","description":"\u003cp\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003eGM 14-Bolt Low Profile Rear Axle Truss – DXF Files\u003c\/p\u003e\n\u003cp\u003eThis low-profile rear axle truss is designed specifically for the GM\/Chevy 14-Bolt Full Float axle with 3.5\" axle tube diameter found in 2500 \u0026amp; 3500 Single Rear Wheel trucks. The design maximizes clearance, strength, and packaging—ideal 3 or 4 link setups with coilovers, shocks, and high-articulation off-road suspension setups.\u003c\/p\u003e\n\u003cp\u003e🔹 CNC-ready DXF file designed for plasma, laser, or waterjet cutting\u003cbr\u003e🔹 Cut from 1\/4\" steel (top plates ONLY may optionally be cut from 3\/8\" for more strength)\u003cbr\u003e🔹 Low-profile design maintains maximum up-travel and shock clearance\u003cbr\u003e🔹 Tab-and-slot construction — no bending required\u003cbr\u003e🔹 Includes one DXF file containing the full truss with all interlocking plates\u003cbr\u003e🔹View dimension drawing to ensure correct fitment\u003c\/p\u003e\n\u003cp\u003eThis truss is designed to fit the following rear axle:\u003cbr\u003eGM\/Chevy 14-Bolt Full Float (10.5\" ring gear)\u003cbr\u003e1999–2006 2500 \/ 3500 SRW trucks\u003cbr\u003e3.5\" axle tube diameter\u003cbr\u003e14-bolt differential cover\u003cbr\u003e6-bolt removable pinion support\u003c\/p\u003e\n\u003cp\u003eThese digital DXF files are intended for personal or commercial fabrication use. No physical truss, hardware, or materials are included with this listing.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":45318421643343,"sku":null,"price":22.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Capture7_ce530dc5-7aa7-4923-b969-70f6adcb1347.png?v=1779934883"},{"product_id":"05-ford-super-duty-dana-60-diff-cover-dxf-files","title":"05+ Ford Super Duty Dana 60 Diff Cover – DXF Files","description":"\u003cp\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003e05+ Ford Super Duty Dana 60 Diff Cover – DXF Files\u003c\/p\u003e\n\u003cp\u003e🔹Includes file with no bending required and simple to assemble flat pattern parts, as well as a file with press brake bending required.\u003c\/p\u003e\n\u003cp\u003e🔹 CNC-ready DXF files designed for laser, plasma, or waterjet cutting from 1\/4\" steel.\u003cbr\u003e🔹 Fits only 05 to current Super Duty Dana 60 Front Axle will not fit other Dana 60 models\u003cbr\u003e🔹 Cover is 3 inches in height for adequate ring gear clearance.\u003c\/p\u003e\n\u003cp\u003eThese are digital DXF files and intended for personal or commercial use to produce physical parts. No physical hardware, brackets, or materials are included with this listing.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":45318846709839,"sku":null,"price":14.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Capture.1JPG.jpg?v=1779935794"},{"product_id":"jeep-wrangler-jk-ultra-low-profile-winch-bumper-dxf-files-copy","title":"JK\/JKU Winch Bumper - DXF Files","description":"\u003cp\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003eJK\/JKU Front Winch Bumper – DXF Files\u003c\/p\u003e\n\u003cp\u003eThese DXF files allow you to fabricate a high-clearance, low-profile front winch bumper for the JK\/JKU. Designed for strength, simplicity, and clean fitment.\u003c\/p\u003e\n\u003cp\u003e🔹 CNC-ready DXF files for plasma, laser, or waterjet cutting\u003cbr\u003e🔹 High-clearance, low-profile design for 2007–2018 JK\u003cbr\u003e🔹 DIY-friendly tab-and-slot construction for easy fit-up and welding\u003cbr\u003e🔹 All components are flat-cut parts — no sheet metal bending required\u003cbr\u003e🔹 Designed to be cut from 3\/16\" steel plate\u003cbr\u003e🔹 Tow shackle mount files included (can be cut from thicker material if desired)\u003cbr\u003e🔹 Winch-compatible — fits most common winch styles\u003cbr\u003e🔹 Simple sourcing: files can be sent to any laser cutting service or cut in-house on a plasma table\u003cbr\u003e🔹 Bolt-on installation — no frame modifications required\u003cbr\u003e🔹 2012–2018 models: no vacuum pump relocation required\u003cbr\u003e🔹 Includes bumper files only (lower crash bar skid plate not included)\u003c\/p\u003e\n\u003cp\u003eThese DXF files are intended for personal or commercial fabrication use to produce physical bumpers. Files may not be shared, resold, or redistributed. No physical bumper, hardware, or materials are included with this listing.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":45367894966351,"sku":null,"price":89.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Capture21.png?v=1780104183"},{"product_id":"gm-14-bolt-4-inch-axle-tube-full-width-truss-dxf-files","title":"GM 14 Bolt 4 Inch Axle Tube Full-Width Truss– DXF Files","description":"\u003cp\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003eGM 14 Bolt Full-Width Axle Truss – DXF Files\u003c\/p\u003e\n\u003cp\u003eThis full-width axle truss is designed for the wider GM 14 Bolt full-floating rear axles found in GM Express and Savana vans, featuring a 70.25\" wheel-mount-surface width and 4\" axle tubes. Designed for high-strength off-road suspension applications including coilovers, air shocks, ORI struts, and custom triangulated link setups.\u003c\/p\u003e\n\u003cp\u003e🔹 CNC-ready DXF files designed for plasma, laser, or waterjet cutting\u003cbr\u003e🔹 Designed specifically for GM 14 Bolt full-float van axles with 70.25\" WMS width\u003cbr\u003e🔹 Fits 4.0\" axle tubes\u003cbr\u003e🔹 Top plates designed for 3\/8\" steel for increased rigidity and strength\u003cbr\u003e🔹 Main truss structure and side plates designed for 1\/4\" steel\u003cbr\u003e🔹 Separate DXF files included for each material thickness\u003cbr\u003e🔹 All tab-and-slot construction — no bending required\u003c\/p\u003e\n\u003cp\u003eAxle dimensions used during design:\u003cbr\u003e• Wheel Mount Surface Width: 70.25\"\u003cbr\u003e• Center casting width: 19.625\"\u003c\/p\u003e\n\u003cp\u003eFitment Note\u003cbr\u003eThis truss is designed around the wider GM  14 Bolt axle (70.25\" Wheel mount surface width) using 4\" axle tubes. Modification may be required to fit narrower pickup-style housings.\u003c\/p\u003e\n\u003cp\u003eThese digital DXF files are intended for personal or commercial fabrication use. No physical truss, hardware, or materials are included with this listing.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":45367919706191,"sku":null,"price":41.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Screenshot2026-05-23113903.png?v=1780104500"},{"product_id":"universal-3-or-4-link-lower-axle-side-bracket-10-deg-dxf-files","title":"Universal 3 or 4 Link Lower Axle Side Bracket (10 deg) – DXF Files","description":"\u003cp\u003eUniversal 3 or 4 Link Lower Axle Side Bracket (10°) – DXF Files\u003c\/p\u003e\n\u003cp\u003eBuilding your custom suspension setup? These DXF files allow you to cut and fabricate your own universal lower axle-side link brackets, designed for triangulated 3-link and 4-link suspension configurations.\u003c\/p\u003e\n\u003cp\u003e🔹 CNC-ready DXF files optimized for plasma, laser, or waterjet cutting from 1\/4\" steel\u003cbr\u003e🔹 Designed for 3.5\" axle tube \u003cbr\u003e🔹 10° angled bracket design for improved joint alignment in triangulated setups\u003cbr\u003e🔹 Flat-cut tab and slot design — no bending required\u003cbr\u003e🔹 Designed to fit 2.625\" (2 5\/8\") wide suspension joints (Johnny Joints, flex joints, or rod ends with high-misalignment spacers)\u003cbr\u003e🔹 Includes 9\/16\" mounting holes, can be edited or drilled to 5\/8\" or larger as needed\u003c\/p\u003e\n\u003cp\u003eThese digital DXF files are in standard inch, and intended for personal or commercial fabrication use. No physical brackets, hardware, or materials are included.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":45368209801295,"sku":null,"price":7.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Screenshot2026-04-21132743.png?v=1780106376"},{"product_id":"universal-4-link-upper-control-arm-frame-side-mount-22-5-deg-dxf-files","title":"Universal 4-Link Upper Control Arm Frame-Side Mount (22.5 deg)– DXF Files","description":"\u003cp\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003eUniversal 4-Link Upper Control Arm Frame-Side Mount 22.5 deg– DXF Files\u003c\/p\u003e\n\u003cp\u003eBuilding your custom suspension setup? These DXF files allow you to cut and fabricate a universal frame-side upper control arm mount designed for 4-link suspension systems, with built-in adjustability for dialing in anti-squat geometry.\u003c\/p\u003e\n\u003cp\u003e🔹 CNC-ready DXF files optimized for plasma, laser, or waterjet cutting from 1\/4\" steel\u003cbr\u003e🔹 Full tab-and-slot assembly — no bending required\u003cbr\u003e🔹 Designed to fit 2.625\" wide suspension joints (Johnny Joints, flex joints, or rod ends with high-misalignment spacers)\u003cbr\u003e🔹 6.5\" long back plate to weld to inner side of frame with integrated 22.5° mounting angle\u003cbr\u003e🔹 Dual 9\/16\" mounting holes spaced 1\" apart for upper link geometry adjustment (anti-squat tuning)\u003cbr\u003e🔹 Suitable for custom 4-link suspension builds and chassis fabrication\u003c\/p\u003e\n\u003cp\u003eThese digital DXF files are in standard inch and intended for personal or commercial fabrication use. No physical brackets, hardware, or materials are included.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":45368263966799,"sku":null,"price":15.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Screenshot2026-04-21153732.png?v=1780106706"},{"product_id":"track-bar-bracket-upper-and-lower-kit-frame-side-and-axle-side-dxf-files","title":"Track Bar Bracket Upper and lower kit - Frame Side and axle side - DXF Files","description":"\u003cp\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003eAdjustable Upper \u0026amp; Lower Axle Track Bar Bracket Kit – DXF Files\u003c\/p\u003e\n\u003cp\u003eThis DXF file package includes cut-ready files for CNC plasma, laser, or waterjet cutting adjustable upper and lower track bar brackets.\u003c\/p\u003e\n\u003cp\u003e🔹 Upper \u0026amp; lower bracket kit for complete track bar height adjustment.\u003cbr\u003e🔹 3 mounting positions to fine-tune suspension geometry and eliminate bump steer.\u003cbr\u003e🔹 Designed for 3.5” axle tubes but can be modified for other sizes.\u003cbr\u003e🔹 9\/16” mounting holes, easily drilled larger if needed.\u003cbr\u003e🔹 1.6” mounting width for lower axle side bracket\u003cbr\u003e🔹 2\" Mounting width for upper frame side bracket\u003cbr\u003e🔹 Keyed design for easy fitment and welding—no complex bending required.\u003cbr\u003eIncludes Standard and METRIC DXF Files\u003c\/p\u003e\n\u003cp\u003eThese are digital files only—no physical parts or hardware are included.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":45368319377487,"sku":null,"price":18.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Capture.jpg?v=1780107045"},{"product_id":"winch-fairlead-mount-dxf-files","title":"Winch Fairlead Mount - DXF Files","description":"\u003cp\u003eDXF CAD files ONLY – No physical product included.\u003c\/p\u003e\n\u003cp\u003eUniversal Winch Fairlead Mount Plate - DXF Files\u003cbr\u003eDesigned to be plasma cut out of 3\/16\" steel sheet.\u003cbr\u003eCan be bent with a press brake or cut then bended by hand and welded.\u003cbr\u003eFits standard 10 by 4.5 winch base mount and standard 10 inch wide holes for the fairlead.\u003c\/p\u003e\n\u003cp\u003eThese are digital files only—no physical parts or hardware are included. Files are for personal use and may not be shared, resold, or redistributed.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":45368627462223,"sku":null,"price":6.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Capture3_97933d28-b660-4306-aa37-07f1cb00521d.jpg?v=1780107997"},{"product_id":"universal-coil-over-rear-shock-tower-dxf-files","title":"Universal Coil Over Rear Shock Tower  – DXF Files","description":"\u003cp\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003eCoilover Shock Towers Rear – DXF Files\u003c\/p\u003e\n\u003cp\u003eThese DXF files let you fabricate heavy-duty rear coilover shock towers with two design options to suit your build. \u003c\/p\u003e\n\u003cp\u003e🔹 CNC-ready DXF files designed for plasma, laser, or waterjet cutting from 1\/4\" steel\u003cbr\u003e🔹 Includes both 11” height with frame notch and 14” height without frame notch\u003cbr\u003e🔹 Designed for 2.5” coilover shocks and rear frame mounting applications\u003cbr\u003e🔹 Adjustable mounting width to fit different shock hardware setups\u003cbr\u003e🔹 Flat-plate, plasma-friendly design – no complex bends required. Easily trimmed or ground to match custom frame profiles\u003c\/p\u003e\n\u003cp\u003eThese digital DXF files are intended for personal or commercial fabrication use. No physical towers, hardware, or materials are included with this listing.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":45368986173519,"sku":null,"price":14.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Capture7_d06c6a08-1d03-4b85-9304-8bd1860c9778.png?v=1780108626"},{"product_id":"coilover-shock-wrenches-dxf-files","title":"Coilover Shock Wrenches – DXF Files","description":"\u003cp\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003eCoilover Shock Wrenches – DXF Files\u003c\/p\u003e\n\u003cp\u003eNeed wrenches for adjusting coilover shocks on your custom build? These DXF files let you cut your own precision-made tools.\u003c\/p\u003e\n\u003cp\u003e🔹 CNC-ready DXF files optimized for plasma, laser, or waterjet cutting.\u003cbr\u003e🔹 Universal design compatible with many popular 2.0” and 2.5” coilover shocks.\u003cbr\u003e🔹 Includes wrench sizes: 3-15\/16”, 2-15\/16”, 3-1\/4”, and 2-3\/8”.\u003cbr\u003e🔹 Plans contain two different double-ended wrenches.\u003c\/p\u003e\n\u003cp\u003eThese digital DXF files are intended for personal fabrication use. No physical wrenches, hardware, or materials included with this listing.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":45369134514255,"sku":null,"price":6.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Capture8.jpg?v=1780109189"},{"product_id":"universal-ls-engine-mounts-dxf-files","title":"Universal LS Engine Mounts – DXF Files","description":"\u003cp\u003eDXF CAD Files ONLY – No Physical Product Included\u003c\/p\u003e\n\u003cp\u003eUniversal LS Engine Mounts – DXF Files\u003c\/p\u003e\n\u003cp\u003eThese universal LS engine mounts are designed around a common polyurethane bushing style mount, allowing you to fabricate custom engine mounts for LS swaps in virtually any chassis. The included chassis-side plates provide extra material that can be trimmed and adapted to suit your frame, crossmember, or custom mounting structure.\u003c\/p\u003e\n\u003cp\u003e🔹 CNC-ready DXF files designed for plasma, laser, or waterjet cutting\u003cbr\u003e🔹 Designed for LS-based engines (LS1, LS2, LS3, LQ4, LQ9, LM7, LY6, etc.)\u003cbr\u003e🔹 Designed to be cut entirely from 1\/4\" steel plate\u003cbr\u003e🔹 Tab-and-slot construction for accurate alignment, easy assembly, and strong weld joints\u003cbr\u003e🔹 Universal chassis-side mounting plates can be trimmed to fit your specific application\u003cbr\u003e🔹 Designed for a 2.625\" (2-5\/8\") wide polyurethane engine mount bushing\u003cbr\u003e🔹 Bushing sleeve designed for a 9\/16\" mounting bolt\u003cbr\u003e🔹 LS block mounting holes designed for M10 hardware\u003cbr\u003e🔹 Ideal for custom chassis builds, buggy projects, engine swaps, and off-road applications\u003c\/p\u003e\n\u003cp\u003eThese mounts are designed to be used with bushed drivetrain mounting systems. Do not mix bushed engine mounts with a rigidly mounted transmission or transfer case. The drivetrain should either be fully isolated using bushings or fully rigid-mounted throughout. \u003c\/p\u003e\n\u003cp\u003eThese digital DXF files are intended for personal or commercial fabrication use. No physical mounts, bushings, hardware, or materials are included with this listing.\u003c\/p\u003e","brand":"DVX Designs","offers":[{"title":"Default Title","offer_id":45521807638607,"sku":null,"price":14.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7283\/6431\/files\/Screenshot2026-06-06142813.png?v=1780772425"}],"url":"https:\/\/dvxdesigns.com\/collections\/frontpage.oembed?page=2","provider":"DVX DESIGNS","version":"1.0","type":"link"}